How to Diagnose Forehand Problems: A Coach’s Checklist

To diagnose a forehand problem, check five things in a fixed order: grip, preparation, spacing, contact point, and swing path with finish. Fix the earliest faulty link first, because almost every late-stroke error (the late contact, the framed ball, the shot that floats long) is caused by something upstream. That order is the one I use whenever I assess a player’s forehand, and it is the quickest way to stop treating symptoms.

Most players do the opposite. They notice the ball landing short or sailing long, then try to change their swing. In my coaching sessions I rarely touch the swing first. I watch what happens before it.

Why diagnosis order matters

A forehand is a chain of movements: legs and hips load, the trunk rotates, the shoulder follows, then the arm and racket accelerate through the ball. If the first links are off, the later ones compensate. A player who prepares late will usually swing with only the arm to catch up. A player who stands too close to the ball will jam the elbow into the body and lose racket speed. Coaching the arm in either case treats the wrong part.

So I work from the ground up and from the start of the stroke to the end. Below is the checklist, with what I look for, the common fault, and a drill for each.

Step 0: Film it properly

Before any diagnosis, I want video. A phone is enough. Film from behind the player along the baseline-to-baseline line, and again from the side at hip height. Use slow motion if the phone offers it. Shoot live rally balls, not only fed balls, because many players hit a tidy forehand when they know the ball is coming and a different one in a rally.

Ten to fifteen forehands at normal rally pace is plenty. Watch them all before concluding anything, since one swing proves nothing and the pattern across several is what counts.

Step 1: Grip

I check the grip first because it limits everything after it. Most modern forehands use a semi-western or eastern grip. A very weak grip (too far toward continental) tends to flatten the ball and makes topspin hard to generate. An extreme western grip can make low balls and fast incoming balls difficult, and it often pushes the contact point too far in front or too high.

What I look for: the base knuckle of the index finger and the heel pad of the hand relative to the racket handle, and whether the grip changes between swings. A grip that shifts from ball to ball tells me the player is adjusting late.

Quick fix and drill

Have the player hold the racket in the ready position with the non-hitting hand on the throat. On the unit turn, the non-hitting hand moves the racket back while the hitting hand sets the grip, and it should stay set. Rehearse that for a dozen shadow swings before any live ball.

Step 2: Preparation and the unit turn

Preparation is where I find the largest share of forehand problems. The question is simple: when the ball crosses the net, is the player already turned and loaded?

A good unit turn is the shoulders and hips rotating together as one piece, with the racket going back as a result of that rotation rather than a separate arm movement. The signs of a late or poor turn are: the chest still facing the net when the ball bounces, the racket brought back by the arm alone, a big looping backswing that has to be rushed, or a stiff front arm that never helps balance the turn.

Timing is the other half. The split step should land as the opponent makes contact, so the player can push off toward the ball. If I see no split step, or a split step that lands after the opponent has already hit, the forehand problem is often a movement problem in disguise.

Drill: shoulder-turn call

Feed from the net, mid-pace. The player says “turn” out loud the moment they read the ball going to the forehand side, and must be fully turned before it bounces. This builds the habit of preparing on the opponent’s contact, not the bounce. Start with 10 balls, then move to cross-court rallies.

Step 3: Spacing and footwork

Spacing is the distance between the player’s body and the ball at contact. Too close and the arm cannot extend; too far and the player reaches, falls off balance, and loses control of the racket face. I look at the last two steps before the hit. Players who take big, late steps or run through the shot nearly always have a spacing issue.

A useful reference: at contact, the arm should be comfortably bent and the ball roughly a racket-and-arm length from the body, to the side and in front. If a player is constantly cramped, they are usually moving to the ball rather than moving to a position beside where the ball will be.

Drill: small adjustment steps

Feed balls with varied depth. The player must finish with two or three small steps before the hit instead of one big lunge. Place a cone about an arm’s length outside the intended contact point as a visual guide. If the racket clips the cone, the player was too close.

Step 4: Contact point

Contact point is what I check once the first three links are sound. For a standard forehand, I want contact out in front of the front hip, around waist height, with the racket face stable through the ball. A contact point beside or behind the body is the classic sign of late preparation, and it produces weak, floating shots or pushes the ball wide.

Be careful here. Contact height changes with the ball. A high ball is taken higher and a low ball lower, with the legs doing the adjusting. A player who always meets the ball at the same height regardless of the bounce has a technical limit, not a style.

Drill: drop-feed contact

The coach (or a partner) drops the ball from the side at the intended contact point and the player hits it on the first bounce. Move the drop point forward and back to let the player feel the difference between late, ideal, and too-early contact. Follow this with the “toss and hit” version, where the player self-feeds, then with live balls.

Step 5: Swing path, racket lag, and finish

Only now do I look at the swing itself. The forehand swing path for topspin travels from low to high through contact, with the racket head lagging slightly behind the hand as the body rotates, then catching up as the arm releases. The finish typically ends across the body or over the opposite shoulder, depending on the player’s style and the shot.

Common faults I see on video: a swing that is flat and horizontal when the player wants spin, a wrist that flicks to “create” topspin rather than letting the path do it, a stopped follow-through that shortens the stroke, and a finish that leaves the player off balance and slow to recover. If the finish is rushed or collapsed, I go back and check whether the problem actually began at preparation or spacing.

Drill: low-to-high with a target

Hang a visual target (a rope or a line of cones) above the net’s height on the player’s side of the court, or simply set a net-clearance target of around a racket’s length above the tape. The player aims to hit through the target with a low-to-high path and finish over the shoulder. This gives the player a physical reference for a swing path instead of a verbal instruction.

How I use this in a lesson

I do not present a player with five corrections at once. After filming and reviewing, I pick the single earliest fault in the chain, give one cue, and run a drill for it until it holds up under live-ball pressure. Then I re-film. Often fixing preparation improves contact point and swing path without any direct comment on them, which confirms the diagnosis.

The same logic applies if you are practising alone or with a hitting partner. Film, check the checklist in order, choose one thing, and practise it for a full session before moving on. For more on structuring practice, see the technique notes on my tennis tips page, and for pressure-based practice patterns, the tactical drills I run to build match IQ. The same step-by-step technical approach underpins the junior work in our competitive junior tennis programme.

Common questions

Why does my forehand break down under pressure?

Pressure usually shortens preparation first. Players hit the ball earlier in their own movement, skip the split step, and swing with the arm. If your forehand is fine in drills but fails in matches, film a live rally or match and look at Step 2 before anything else.

Should I change my grip to hit more topspin?

Not automatically. Topspin comes mostly from swing path and racket-head speed. A move toward a semi-western grip can help if you are very weak or flat, but changing grip while the preparation and spacing are faulty rarely solves anything and usually costs a few weeks of timing.

How long does it take to fix a forehand fault?

It depends on how long the pattern has been there and how often the player practises. A fault repeated for years needs consistent repetition before it holds in a match. Expect to feel awkward first, then to see the fix survive in practice rallies, and finally to trust it in competition.


Written by Tan Xu Teng (Coach XT), Head Tennis Coach and founder of TAG International Tennis Academy. Coach XT specializes in technical diagnostics, competitive player development, and modern coaching methodology in Singapore.

12 responses to “How to Diagnose Forehand Problems: A Coach’s Checklist”

Leave a Reply