One-Handed Backhand Technique: Grip, Turn and Drills

A good one-handed backhand is built on four things: an eastern backhand grip, a full shoulder turn with the non-hitting hand supporting the throat of the racket, a contact point well in front of the front foot, and a straight hitting arm that the body rotates around rather than swings with. The non-hitting arm then stays back as the racket goes through, which keeps the shoulders from opening too early. Get those four positions right and the stroke becomes simple, stable and capable of real variety. Get one wrong and the one-hander is the least forgiving shot in tennis. I hit a one-handed backhand myself in competition, and below I break down how I teach it: the mechanics in order, the drills I use, and how to handle the high ball that every one-hander has to solve.

This guide is about building the stroke. If you already have a one-hander and it has started to break down, my backhand diagnostic checklist is the better starting point, because it works through faults in the order they usually appear.

Why the one-handed backhand is built differently

On a two-handed backhand, the non-dominant arm does much of the work, and the second hand gives you a margin for late preparation. The one-hander has no such safety net. One arm, extended away from the body, has to meet the ball in the right place at the right time, and the stroke relies on the trunk turning and then stopping at the right moment.

That is why I describe the one-hander as a positional stroke. It is less about effort and more about arriving in a few precise shapes. When players tell me their one-hander feels weak, the cause is almost never arm strength. It is a late turn, a cramped contact point or shoulders that open too soon.

The trade-off is worth understanding before you commit. The one-hander gives you extra reach, easier access to the slice and the drive volley from the same grip family, and a natural route to an all-court game. It asks for more time and more precise footwork than the two-hander does, especially against high, heavy balls. I play an all-court game, and for me that trade has always been worth it, but it is a choice, not a default.

The mechanics, in the order I teach them

1. Grip: eastern backhand as the starting point

Most one-handers I coach start with an eastern backhand grip: the base knuckle of the index finger sits on the top bevel of the handle, so the palm is mostly on top of the grip. This puts the racket face close to vertical at a contact point out in front, and it gives the wrist a stable, braced position behind the handle.

Some players with heavy topspin drift towards a slightly stronger grip, between eastern and semi-western backhand. That can help on high balls but makes low balls harder. Players who come from a continental grip almost always leave the face open and float the ball, which is why I check grip first. If your hand never seems to settle on the handle, check that the handle is the right size too; my grip size guide explains why one-handers notice a wrong size more than most.

2. Unit turn with the non-hitting hand on the throat

The backhand starts with the shoulders, not the racket. As soon as I read the ball coming to my backhand, I turn my shoulders and hips together as a unit, and my non-hitting hand holds the racket at the throat. That hand is doing three jobs. It takes the racket back so the hitting arm stays relaxed, it lets me change to the backhand grip without thinking about it, and it guarantees a full shoulder turn.

The target position is a shoulder turn past side-on, so the opponent can see some of your back. Players coming from the forehand side or from a two-hander often stop at side-on. From there the arm has nowhere to swing from, and they compensate by pulling with the arm. The turn has to happen early, ideally as you land from your split step, not as the ball bounces.

3. Racket drop and the slot below the ball

For a topspin backhand, the racket head drops below the level of the incoming ball before the forward swing. I keep the drop relaxed. If the hand releases the throat too early, the racket falls loosely behind the back and the swing becomes long and late. If it releases too late, there is no drop and the stroke turns into a flat push.

The cue I use with students is simple: the non-hitting hand lets go when the forward swing begins, and not before. From that point it moves back, not forward.

4. Contact point: further forward and further away

This is the single biggest difference from the two-hander. The one-handed contact point sits noticeably further in front of the front foot and slightly further from the body. The arm is straight, or very close to straight, at contact. A bent elbow at contact is the classic cause of a weak, sliced or framed one-hander, because the arm is still unfolding as the ball arrives.

I describe the ideal position as the hitting shoulder, elbow and racket forming roughly one line through contact, with the racket face square to the target. Spacing has to be right for this to happen. Too close, and the arm cannot straighten. Too far, and the player reaches with the wrist. Footwork, not the arm, decides spacing, which is why the footwork checklist matters as much for one-handers as any stroke drill.

5. Rotation around a stable shoulder, then the brake

On the forehand, the trunk keeps rotating through the shot. On the one-handed backhand, the trunk rotates into the shot and then stops. The hitting arm keeps travelling, almost like a pendulum hinged at the shoulder, while the chest stays close to side-on through contact.

The non-hitting arm is what produces that brake. As the hitting arm swings forward, the other arm extends backwards in the opposite direction, so the two arms open away from each other. This counter-movement keeps the shoulders from spinning open and gives the stroke its stability. When I watch film of players whose one-hander sprays wide, the non-hitting arm usually follows the racket forward instead of staying back.

6. Low-to-high path and a full finish

The swing path rises from below the ball to above it, with the racket head lagging slightly behind the hand early in the forward swing and then catching up through contact. The finish is high and long, with the hitting arm extended upward and the racket pointing to the sky or slightly across. The chest should still be roughly side-on at the finish. If you end facing the net, you have rotated too far.

The same principles of lag and swing path apply to the forehand, though the body works differently. If you want to compare the two, my topspin forehand guide covers the forehand version.

How to handle the high ball on a one-handed backhand

Every one-hander is tested by the high, heavy ball to the backhand. With one arm, it is harder to stay strong above shoulder height, and opponents know it. I teach three answers, and I want players able to use all three.

  • Take it early. Step forward and meet the ball on the rise, before it climbs above the shoulder. This needs an early turn and a short backswing, and it is the most aggressive option.
  • Take it late. Move back and let the ball drop into your strike zone. This gives you a comfortable contact height but costs court position, so it suits defensive moments.
  • Slice it. A high backhand slice from the same family of grip keeps the ball low and buys time. My backhand slice guide covers how to keep it penetrating rather than floating.

What I do not want is the fourth option most players default to: standing on the baseline and hitting a high ball at shoulder height with a weak, flat swing. That is the ball the opponent wants you to hit.

Drills I use to build the one-handed backhand

These are the drills I return to most often. Each one isolates one part of the chain above, so pick the drill that matches the position you are missing.

Throat-hand shadow swings

Without a ball, hold the racket at the throat with the non-hitting hand, perform the unit turn, release, swing and freeze at the finish with both arms extended in opposite directions. Ten slow repetitions before every backhand session. It looks basic, but it builds the turn and the counter-arm better than any verbal cue.

Contact-point freeze

A partner feeds slow balls from a short distance. You hit and hold your position at contact for two seconds. The partner checks three things: a straight arm, the contact point in front of the front foot, and the chest still close to side-on. This drill shows you exactly where your current contact is, which is often further back than you think.

Two-cone spacing drill

Place a cone where your front foot should land and another an arm-and-racket’s length to the side, roughly where the ball should be struck. Rally slowly from feeds, trying to land the step and hit beside the second cone every time. It forces the footwork adjustments that make a straight-arm contact possible.

Crosscourt backhand consistency ladder

Rally backhand to backhand crosscourt. Start with a target of ten balls past the service line, then fifteen, then twenty. Only increase pace once you hit the target twice in a row. Crosscourt is the natural direction for a one-hander and is the foundation of the patterns in my crosscourt versus down the line guide.

High-ball decision drill

A feeder sends a mix of high topspin balls to your backhand without warning. You call “early”, “late” or “slice” before you hit, then execute. The aim is to train the decision as much as the stroke, so the high ball stops being a surprise.

If you are practising without a partner, the shadow swings and a wall rally cover a surprising amount of the work. My solo practice drills list more options.

Five common one-handed backhand mistakes

  • Turning late. The racket starts back after the bounce, so contact ends up beside or behind the body. Fix it by turning the shoulders as you land from the split step.
  • Bent arm at contact. Usually a spacing problem, not an arm problem. Use the contact-point freeze drill and look at where your front foot lands.
  • The non-hitting arm follows the racket. The shoulders open, the ball sprays wide. Keep that arm moving back as the racket goes forward.
  • Wrist flick for topspin. Spin comes from the low-to-high path, not from the wrist. A flicking wrist produces inconsistency and loads the forearm.
  • Only one height. Players groove the backhand at waist height and have no answer above the shoulder. Train the high ball deliberately.

Should you choose a one-handed or two-handed backhand?

I am often asked this by parents of juniors and by adult beginners. My view is that the two-hander is easier to learn and more stable under pressure for most players, especially younger children who are not yet strong enough to control the racket with one arm. The one-hander suits players with good timing and footwork, who like to move forward, and who want the slice and volley to feel connected to their backhand.

I would not switch an established backhand because of a short run of bad results. Most backhand problems are preparation and spacing problems, and they follow you to either version. Decide after a coach has watched you over several sessions, not on the strength of how one professional’s backhand looks on video.

Common questions

How far in front should I hit a one-handed backhand?

Noticeably further in front of your front foot than on a two-handed backhand, with the arm straight at contact. The exact distance depends on your height, grip and the ball’s speed, so use the contact-point freeze drill to find your own position rather than measuring.

Why does my one-handed backhand go long or float?

The most common causes are an open racket face from a grip that is too close to continental, and a late contact point with the arm still bent. Check the grip first, then the timing of your turn. A finish where your chest faces the net is another sign that the shoulders opened too early.

How do I return serve with a one-handed backhand?

Shorten the backswing, rely on the shoulder turn rather than a full take-back, and use the block or slice return when the serve is fast or kicking high. My return of serve tactics guide covers where to stand and which targets to choose.


Written by Tan Xu Teng (Coach XT), Head Tennis Coach and founder of TAG International Tennis Academy. Coach XT specializes in technical diagnostics, competitive player development, and modern coaching methodology in Singapore.

Leave a Reply